0 actions
+ expand
View larger images (3)
   
Woodworking-Resaw

Manuf: Baker
Model: 4-Head
Condition: Good
Location: Midwest
Price: Call for Price

  • Baker 4-Head
  • Rebuild includes New: Belts, Bearings, Sprockets where needed
  • Recrowned Band Wheels
  • Return Conveyor
This machine is ready to be loaded. http://www.carolinamachinerysales.com/used/006960/Baker-4-Head-Resaw#
Top referrer: https://goo.gl/fgUsrM

0 actions
+ expand
View larger images (5)
Woodworking-Misc

Manuf: Unknown
Model: Mixer/Blender
Condition: Good
Location: NC
Price: Call for Price

  • Set up for chemical processing
  • Possible to mix powders
  • Tank is approx 9' long x 3' deep
This system was rebuilt by the current owner.  He coated the machine and added the steps and work platform. http://www.carolinamachinerysales.com/used/006959/Unknown-MixerBlender#

0 actions
+ expand
View larger image
Woodworking-Door Equipment

Manuf: Fletcher
Model: EZ Door
YMFG: 2006
Voltage: 208/220V, 60Hz, 3Ph
Condition: As Taken from service
Location: South
Price: Call for Price

  • Fletcher EZ-Door
  • PLC Controlled
  • Simple 4-position one spindle design
  • 1-1/4" Spindle allows for a cutter stack of up to 8"
  • 7.5 HP Spindle Motor
  • 6500 RPM Spindle Speed
  • 62" Travel Length
  • 1-1/8" Arches standard
  •  
This machine is no longer needed at the current facility.  Ready to load http://www.carolinamachinerysales.com/used/006958/Fletcher-EZ-Door- Read more

0 actions
+ expand
View larger images (3)
   
Sawmill/Pallet-Notcher

Manuf: Kent
Model: Single Head Notcher
Condition: As Taken From Service
Voltage: 208V, 60Hz, 1Ph
Location: Tennessee
Price: Call for price

  • Kent Single Head Notcher
  • 5 HP Single Phase Motor
  • Foot pedal control
  •  
This machine is no longer needed at the current facility and is ready to load http://www.carolinamachinerysales.com/used/006943/Kent-Single-Head-Notcher#

0 actions
+ expand
View larger images (5)
Woodworking-Rip Saw-Gang Rip

Manuf: Wintersteiger
Model: DSG150ECO
Condition: As Taken From Service
Voltage: 480V, 60Hz, 3Ph
Location: Alabama
Price: Call for Price

  • Include: Center guide and rollers
  • Feed speed: 0.3 -1.8
  • Stroke of saw: 210 mm
  • Strokes per minute: 450
Also available: 2005 Wintersteiger Micro Grinder

Tech Data

Saw blade length    380-560mm

Scraper saw length  380-56mm

Saw blade thickness  0,6-3,0mm

Tooth pitch  10to25mm

Tooth depth  3 to 8mm

Rake angle  -5 to +25 Read more


0 actions
+ expand
View larger image
Sawmill/Pallet-Dismantler

Manuf: Rogers
Model: 54B Un-Nailer
Condition: Good
Location: Northeast
Price: Call for Price


Basic Rogers Disc Dismantler

http://www.carolinamachinerysales.com/used/006750/Rogers-Model-54B-UnNailer#

0 actions
+ expand
View larger images (2)
     
Woodworking-Gang Rip Saw

Manuf: Cornell
Voltage: 230V, 60Hz, 3Ph
Condition: As Taken From Service
Location: Northeast
Price: Call for Price

  • (2) 40 HP Motors
  • Infeed
This machine is ready to be loaded! http://www.carolinamachinerysales.com/used/006748/Cornell-Gang-Rip-Saw#

0 actions
+ expand
View larger images (3)
   
Sawmill/Pallet-Edger

Manuf: Corley
Condition: As Is, Where Is
Voltage: 208/480V, 60Hz, 3Ph
Location: Virginia
Price: Call for price

  • (2) Blades -Each has a 15HP motor
  • Center split blades
  • Blades each run by hydraulic so one can be fixed (stationary) and the other move or both stationary or both moveable
  • Infeed rolls
    • 5HP
  • Outfeed conveyor (deck not included in photo)
  • Hydraulic pack
    • 10HP
  • 28" width
  • Max 4" thick cut
  •  
This machine was purchased by the seller and never put into service.  Read more

0 actions
+ expand
View larger images (5)
Woodworking-Misc

Manuf: Unknown
Model: Mixer/Blender
Condition: Good
Location: North Carolina
Price: Call for Price

  • Set up for chemical processing
  • Possible to mix powders
  • Tank is approx 9' long x 3' deep
This system was rebuilt by the current owner.  He coated the machine and added the steps and work platform. http://www.carolinamachinerysales.com/used/006959/Unknown-MixerBlender#

0 actions
+ expand
View larger images (4)
 
Woodworking-Planer

Manuf: Cantek
Model: CM626
Condition: "As Is, Where Is"
Location: Tennessee
Price: Call for price

  • 26"
  • 20HP main motor
  • 1HP feed motor
  • 1/2 HP table motor
  • Spiral cutterhead with (6) rows insert knives for high removal, superior finish and low noise
  • Variable feed speed
  • Drive top and bottom feed rolls
  • Anti kick back fingers for added safety
  • Dust exhaust outlet: 6"
  • Max width: 26"
  • Max thickness: 11-3/4"
Read more

debbiecms1234
Share my photo blog
  • 2960
  • photos
  • 0
  • videos