Manufacturer: Eagle Model: 800 Strapping machines Voltage: 110V, 50Hz, 1Ph Location: East Coast Condition: As Taken From Service Price: $1,500
There are (3) available Power 110VAC, 50/60Hz Minimum Carton Size 4” x 2” Standard Arch Size 33.4” x 23.6” Tabletop Height 31.9in, 810mm Core Size 8” x 8” Tension 5 to 154 lbs. Machine Dimensions 56” x 24” x 60.6” Strapping Speed 29 straps/min. Strap Size Width: 8-12mm, 0.4-0.5in Thickness: 0.55-0.75mm, 0.022-0.03in Sealing Method Heat Contact: Ralph Viegelmann 704-288-1904 Link to machine: http://www.carolinamachinerysales.com/used/006616/Eagle-800-Strapping-Machines
Manufacturer: Mereen Johnson Model: 435H Dado/Trim Saw Location: West Coast Price: $9,000
Manufacturer specs (to be confirmed):
High Production Slat bed Panel Rip-saw that has seen only moderate work load, 3,800hours.
Capacity: Ripping nominal 63" x 2" maximum thickness panels into strips using 12" maximum diameter tooling. Right hand zero side.
Friction feed of infinite length panels with exclusive POSI-FEED dip chain slat bed with a dip at the cut line to prevent blade contact with the chain. 5” pitch feed chains carry aluminum slats with replaceable steel backed rubber insert strips. Precision feed sprockets with hardened teeth. Oil mist lubrication of bottom chain surface and extended pins. Automatic shut-down of the machine if oil and air supply are too low to prevent running without adequate lubrication.