0 actions
+ expand
View larger images (5)
Woodworking-Finishing Equipment

Manuf: Complete Operation
Condition: As Taken From Service
Location: Midwest
Price: Call for Price

  • Nordson Booth
  • Raytec Gas Oven
  • Elevated conveyor with hangers
  • (3) Dip Tanks

This room is complete and available for immediate removal.  Seller can assist with dismantling and loading.  Available for inspection.

http://www.carolinamachinerysales.com/used/007246/Complete-Operation-Powder-Coating-Room#

0 actions
+ expand
View larger images (3)
   
Woodworking-Optimizing Saw

Manuf: Dimter
Model: Opticut 450 w/Woodeye
Condition: Good
Location: Australia
Price: Call

  • Dimter 450 Optimizing Saw -Rebuilt in 2015
  • WoodEye 4 -Computers upgraded in 2016
  • Average running capacity: 600 mm Infeed lengths is @ 33,000 m/9.5 hour shift
  •  
This system is still under power and available for inspection. http://www.carolinamachinerysales.com/used/007245/Dimter-Opticut-450-with-Woodeye

0 actions
+ expand
View larger images (4)
 
Woodworking-Dust Collection

Manuf: Unknown
Condition: As Taken From Service
Location: Midwest
Price: Call for Price

This system is still connected in a plant that has closed.  The seller does have the ability to dismantle/rig the system onto trucks.

http://www.carolinamachinerysales.com/used/007243/Unknown-Dust-Collection-System

0 actions
+ expand
View larger images (4)
 
Woodworking-Moulder

Manuf: Weinig
Model: H23C
YMFG: 2000
Condition: As Taken From Service
Location: Midwest
Price: Call for Price

  • Weinig Hydromat 23C
  • 5-Head Machine
  •  
This machine is still under power and available for inspection.  The facility has closed and the machine is ready to be loaded. http://www.carolinamachinerysales.com/used/007242/Weinig-H23C

0 actions
+ expand
View larger images (3)
   
Sawmill/Pallet-Dip Tank

Manuf: Monticello
Model: Lumber Dip Tank
Condition: Good
Location: Midwest
Price: Call

Monticello Dip Tank with hydraulic lift

http://www.carolinamachinerysales.com/used/007241/Monticello-Machine--Lumber-Dip-Tank

0 actions
+ expand
View larger images (3)
   
Sawmill/Pallet-Bagging

Manuf: Maren
Model: 14
Condition: As Taken From Service
Location: Midwest
Price: Call

This machine was still being used when the power was shut off.  Needs to be cleaned out.  Seller will load on the truck.

http://www.carolinamachinerysales.com/login/detail.php?machid=7240

0 actions
+ expand
View larger images (3)
   
Woodworking-Material Handling

Manuf: Gorbel
Model: 2000lbs Bridge Crane
Condition: Good
Location: Midwest
Price: Call for Price

Gorbel 2,000 Lbs crane with 4-posts.
  • Corner posts are just over 20' apart.
  • Wood's Power Grip with (8) suction pads

This system is ready to be removed from the current location.

http://www.carolinamachinerysales.com/used/007239/Gorbel-2000-Lbs-Bridge-Crane

0 actions
+ expand
View larger images (3)
   
Sawmill-Pallet-Trim Saw

Manuf: Newman
Model: KM 16
Condition: As Taken From Service
Location: Northeast
Price: Call for Price

  • 6-Saw machine
  • 17' Length Capacity
  • Run on hydraulics and pneumatics
  • Removed from service in running condition
http://www.carolinamachinerysales.com/used/007235/Newman-KM16-with-Hydraulic-Setup

0 actions
+ expand
View larger images (3)
   
Woodworking-CNC Router

Manuf: Weeke
Model: Vantech 510
YMFG: 2016
Condition: Very Good
Location: NC
Price: Call for Price

  • Weeke Vantech 510 CNC Router
  • System has less than 1,000 of run time
  • 5' x 10' Table

Seller is upgrading to a larger machine.  Everything is still under pwer and available for inspection.

http://www.carolinamachinerysales.com/used/007223/Weeke-Vantech-510#

0 actions
+ expand
View larger images (4)
 
Woodworking-Edgebander

Manuf: IDM
Model: Idimatic 66/20
YMFG: 1997
Condition: As Taken From Service
Location: West Coast
Price: Call for price

Edgebanding thickness capacity, 10 --50 mm (3/8" --2") panel thickness, 60 mm (2-3/8") minimum panel width & 140 mm (5-1/2") minimum length Pre-milling station with (2) 3 HP --12,000 RPM counter rotating vertical milling heads: both with pneumatic jump control, 30 mm spindles and SIKO digital readouts for setup & adjustments, fully enclosed by noise insulated cabin Front & rear end trims (motors 0.8 HP --14,400 RPM each), motors tilt 0° -12° on horizontal plane, 2nd blade setup allows 45° chamfer cut Top & bottom rough trims (motors 2.5 HP --14,400 RPM each), tilts 0-30° Top & bottom fine/bevel/profile multi-function trims (motors 0.9 HP --12,000 RPM each), tilts 0°-10° for bevel and 3 mm PVC corner round (prepared for "quick change" of motors, for interchangeable 2nd set of bevel/radius trim units) Corner Read more

debbiecms1234
Share my photo blog
  • 3467
  • photos
  • 0
  • videos